All Featured Servers
High Performance Server
High Bandwidth Server
Virtual Private Server
Network & CDN
Dedicated Network Equipment
Network Management Pack
Dedicated Network Setup
Web Application Firewall
DDoS IP Protection
Managed Cyber Security
Server and Cloud Migration
MarTech & AdTech
SAP HANA Hosting
Test & Development
Corporate Social Responsibility
Security & Certifications
Working at Leaseweb
Legal & Compliance
KYC Customer Verification
You are here
NEW HIGH PERFORMING SERVER MODELS.
Dell R740xd (12 LFF)/2x Intel Octa-Core Xeon Gold 6134
1 hour delivery *
* If this is your first service in this location, your order can occasionally take slightly longer due to the
and order acceptance process.
1 . Hardware
2 x Intel Octa-Core Xeon Gold 6134 - 8 cores - 3.2 Ghz
There can be many good reasons for using RAID. A few are; the ability to combine several physical disks into one larger "virtual" device, performance improvements, and redundancy.
It is very important to understand that RAID is not a substitute for backups.
Some RAID levels will make your systems immune to data loss from single-disk failures, but RAID will not allow you to recover from an accidental "rm -rf /". RAID will also not help you preserve your data if the server holding the RAID itself is lost in one way or the other (i.e. raid controller failure, earthquake, etc.) RAID will generally allow you to keep systems up and running, in case of common hardware problems (single disk failure). It is not in itself a complete data safety solution. This is very important to realize!
There are various raid level available, giving different trade-offs of protection against data loss, capacity, and speed. RAID levels 0, 1, 5 and 10 are the most commonly found, and cover most requirements.
- RAID 0 (striped disks) distributes data across several disks in a way that gives improved speed and no lost capacity, but all data on all disks will be lost if any one disk fails. Although such an array has no actual redundancy, it is customary to call it RAID 0.
- RAID 1 (mirrored settings/disks) duplicates data across every disk in the array, providing full redundancy. Two (or more) disks each store exactly the same data, at the same time, and at all times. Data is not lost as long as one disk survives. Total capacity of the array equals the capacity of the smallest disk in the array. At any given instant, the contents of each disk in the array are identical to that of every other disk in the array. At LeaseWeb, by default RAID 1 will be provided only on the first two disks of the server. The remaining disks are left unconfigured.
For more information, see the RAID article on our Knowledge Base https://kb.leaseweb.com/display/KB/RAID
RAID10 (Stripe + Mirror)
RAID5 (Striped parity)
2 . Software
Dedicated Servers: LeaseWeb offers a wide selection of Operating Systems (OS), so you can select the OS that best matches your business. If you require an OS that is not shown on our website, please contact our Sales department to discuss the possibilities. Limitation: 32-bit operating systems do not support more than 4 GB RAM (without adaptations). Cloud Hosting: The selection of OS for (Premium) Virtual Servers and Cloud instances is limited to those shown on the website.
Windows (64 bit)
Linux (64 bit)
No Operating System
VMWare vSphere ESXi 5.5
VMWare vSphere ESXi 6.0
VMWare vSphere ESXi 6.5
VMWare vSphere ESXi 6.7
Windows 2012 R2 Datacenter (8 cores)
Windows Server 2012 R2 Datacenter (16 cores)
Windows Server 2012 R2 Datacenter (20 cores)
Windows Server 2012 R2 Datacenter (24 cores)
Windows Server 2012 R2 Datacenter (28 cores)
Windows Server 2012 R2 Datacenter (32 cores)
Windows Server 2012 R2 Datacenter (40 cores)
Windows Server 2012 R2 Datacenter (48 cores)
Windows 2012 R2 Standard (8 cores)
Windows Server 2012 R2 Standard (16 cores)
Windows Server 2012 R2 Standard (20 cores)
Windows Server 2012 R2 Standard (24 cores)
Windows Server 2012 R2 Standard (28 cores)
Windows Server 2012 R2 Standard (32 cores)
Windows Server 2012 R2 Standard (40 cores)
Windows Server 2012 R2 Standard (48 cores)
Windows Server 2016 Datacenter (8 cores)
Windows Server 2016 Datacenter (16 cores)
Windows Server 2016 Datacenter (20 cores)
Windows Server 2016 Datacenter (24 cores)
Windows Server 2016 Datacenter (28 cores)
Windows Server 2016 Datacenter (32 cores)
Server 2016 Datacenter (36 cores)
Windows Server 2016 Datacenter (40 cores)
Windows Server 2016 Datacenter (48 cores)
Windows Server 2016 Standard (8 cores)
Windows Server 2016 Standard (16 cores)
Windows Server 2016 Standard (20 cores)
Windows Server 2016 Standard (24 cores)
Windows Server 2016 Standard (28 cores)
Windows Server 2016 Standard (32 cores)
Server 2016 Standard (36 cores)
Windows Server 2016 Standard (40 cores)
Windows Server 2016 Standard (48 cores)
Windows Server 2019 Datacenter (8 cores)
Windows Server 2019 Datacenter (16 cores)
Windows Server 2019 Datacenter (20 cores)
Windows Server 2019 Datacenter (24 cores)
Windows Server 2019 Datacenter (28 cores)
Windows Server 2019 Datacenter (32 cores)
Server 2019 Datacenter (36 cores)
Windows Server 2019 Datacenter (40 cores)
Windows Server 2019 Datacenter (48 cores)
Windows Server 2019 Standard (8 cores)
Windows Server 2019 Standard (16 cores)
Windows Server 2019 Standard (20 cores)
Windows Server 2019 Standard (24 cores)
Windows Server 2019 Standard (28 cores)
Windows Server 2019 Standard (32 cores)
Server 2019 Standard (36 cores)
Windows Server 2019 Standard (40 cores)
Windows Server 2019 Standard (48 cores)
3 . Network
Uplink Port Speed
The uplink port is the maximum network connection speed from the server to the Internet. All servers have a 100/1000 Mbps network card connected for Internet traffic. Our 10 Gbps servers are, of course, supplied with 10 Gbps network cards. Weekly, monthly, and yearly bandwidth graphs are available in real time via the Customer Portal (CP), LeaseWeb’s customer portal. You can also view the projected bandwidth during a billing cycle to help you plan for future needs.
1 x 1000Mbps Full-Duplex
includes an economical mix of transit providers allowing for the lower cost to be passed on to the customer. The
includes more transit providers and better speed to those hard to reach providers on the Internet. Leaseweb can meet all your network requirements - depending on the type of application you are hosting at Leaseweb we are able to recommend different networks at varying price points and grades of service.
Fair Use Policy (FUP)
The service is provided to end-user Customers for normal, fair, and reasonable use. Bandwidth usage is to be reasonably consistent throughout every month, without irregular bandwidth usage patterns, either individually or as part of a group of Customer servers. For more details please consult: to
Special Terms and Conditions – 100 TB and 250 TB
Virtual Servers and Cloud:
Every Virtual Server and Cloud instance is provided with a single IPv4 address. Please note that it is not possible to order additional IPv4 addresses. For Private Cloud you can order up to 256 IP adresses.
Dedicated Servers/Bare Metal Servers:
You can order up to 16 IP addresses for Dedicated or Bare Metal Servers.
You can order up to 256 IP addresses for a half-rack or full rack. For shared Colocation the limit is 16 IP addresses.
Please note that the RIPE Network Coordination Centre has very stringent application criteria for IP assignment. LeaseWeb adheres to this policy and has implemented an internal procedure to comply. This may mean that you are not eligible for the maximum number of IP addresses as stated above. Our sales team will be happy to consult with you on the next steps for requesting additional addresses via firstname.lastname@example.org.
DDoS IP protection
DDoS IP Protection Standard
Available for all Leaseweb products, and has the capacity to handle volumetric attacks of up to 5Gbps.
DDoS IP Protection Advanced
Offers more protection, the capacity to handle volumetric attacks of up to 10Gbps, and the ability to choose the right detection profile for your traffic patterns.
DDoS IP Protection Standard
DDoS IP Protection Advanced (1 IP)
4 . Contract
Service Level Agreements
LeaseWeb houses its bare metal servers in secure, advanced data centers and can provide additional peace of mind for your business' critical operations with an extended Service Level Agreement (SLA).
You can find out more at our SLA page:
Basic – 24x7x12
Response time: 12hrs – Free phone 24/7 support – Hardware replacement in 24hrs
Bronze – 24x7x4
Response time: 4hrs – Free phone 24/7 support – Hardware replacement in 4hrs - 30mins per month of Advanced Support
Silver – 24x7x2
Response time: 2hrs – Free phone 24/7 support – Hardware replacement in 3hrs - 60mins per month of Advanced Support
Gold – 24x7x1
Response time: 1hrs – Free phone 24/7 support – Hardware replacement in 2hrs - 90mins per month of Advanced Support
Platinum - 24x7x½
Response time: 30mins – Free phone 24/7 support – Hardware replacement in 2hrs - 120mins per month of Advanced Support
Share your configuration
An error occured, please try again!
Copy and paste the link below to share your configuration:
Copied to clipboard!
Press Ctrl+C or Command+C to copy the link to your clipboard.
ADD TO CART
If you require more resources, please contact us for a custom quote
send us an e-mail
The International site provides access to our global portfolio of products.
For hosting exclusively in the United States, visit the US site.