Microsoft Azure Stack
CDN & Storage
Web Application Firewall
DDoS IP Protection
Managed Cyber Security
Server and Cloud Migration
MarTech & AdTech
SAP HANA Hosting
Test & Development
Corporate & Social Responsibility
Security & Certifications
Working at Leaseweb
Legal & Compliance
KYC Customer Verification
You are here
IBM x3650 M4/2x Intel Hexa-Core Xeon E5-2620/64GB DDR3/6X1TB SATA
1 hour delivery *
* If this is your first service in this location, your order can occasionally take slightly longer due to the
and order acceptance process.
1 . Hardware
IBM x3650 M4
2x Intel Hexa-Core Xeon E5-2620 - 6 cores - 2.00 Ghz
There can be many good reasons for using RAID. A few are; the ability to combine several physical disks into one larger "virtual" device, performance improvements, and redundancy.
It is very important to understand that RAID is not a substitute for backups.
Some RAID levels will make your systems immune to data loss from single-disk failures, but RAID will not allow you to recover from an accidental "rm -rf /". RAID will also not help you preserve your data if the server holding the RAID itself is lost in one way or the other (i.e. raid controller failure, earthquake, etc.) RAID will generally allow you to keep systems up and running, in case of common hardware problems (single disk failure). It is not in itself a complete data safety solution. This is very important to realize!
There are various raid level available, giving different trade-offs of protection against data loss, capacity, and speed. RAID levels 0, 1, 5 and 10 are the most commonly found, and cover most requirements.
- RAID 0 (striped disks) distributes data across several disks in a way that gives improved speed and no lost capacity, but all data on all disks will be lost if any one disk fails. Although such an array has no actual redundancy, it is customary to call it RAID 0.
- RAID 1 (mirrored settings/disks) duplicates data across every disk in the array, providing full redundancy. Two (or more) disks each store exactly the same data, at the same time, and at all times. Data is not lost as long as one disk survives. Total capacity of the array equals the capacity of the smallest disk in the array. At any given instant, the contents of each disk in the array are identical to that of every other disk in the array. At LeaseWeb, by default RAID 1 will be provided only on the first two disks of the server. The remaining disks are left unconfigured.
- RAID 5 (striped disks with parity) combines three or more disks in a way that protects data against loss of any one disk; the storage capacity of the array is reduced by one disk.
- RAID 10 (or 1+0) uses both striping and mirroring. "01" or "0+1" is sometimes distinguished from "10" or "1+0": a striped set of mirrored subsets and a mirrored set of striped subsets are both valid, but distinct, configurations.
For more information, see the RAID article on our Knowledge Base https://kb.leaseweb.com/display/KB/RAID
RAID 5 (Striped parity)
RAID 10 (Stripe + Mirror)
RAID 1 (Mirror)
2 . Software
Dedicated Servers: LeaseWeb offers a wide selection of Operating Systems (OS), so you can select the OS that best matches your business. If you require an OS that is not shown on our website, please contact our Sales department to discuss the possibilities. Limitation: 32-bit operating systems do not support more than 4 GB RAM (without adaptations). Cloud Hosting: The selection of OS for (Premium) Virtual Servers and Cloud instances is limited to those shown on the website.
Windows (64 bit)
Linux (64 bit)
VMWare vSphere ESXi 5.5
VMWare vSphere ESXi 6.0
VMWare vSphere ESXi 6.5
VMWare vSphere ESXi 6.7
Windows 2012 R2 Datacenter (8 cores)
Windows Server 2012 R2 Datacenter (16 cores)
Windows Server 2012 R2 Datacenter (20 cores)
Windows Server 2012 R2 Datacenter (24 cores)
Windows Server 2012 R2 Datacenter (28 cores)
Windows Server 2012 R2 Datacenter (40 cores)
Windows Server 2012 R2 Datacenter (48 cores)
Windows 2012 R2 Standard (8 cores)
Windows Server 2012 R2 Standard (16 cores)
Windows Server 2012 R2 Standard (20 cores)
Windows Server 2012 R2 Standard (24 cores)
Windows Server 2012 R2 Standard (28 cores)
Windows Server 2012 R2 Standard (40 cores)
Windows Server 2012 R2 Standard (48 cores)
Windows Server 2016 Datacenter (8 cores)
Windows Server 2016 Datacenter (16 cores)
Windows Server 2016 Datacenter (20 cores)
Windows Server 2016 Datacenter (24 cores)
Windows Server 2016 Datacenter (28 cores)
Windows Server 2016 Datacenter (40 cores)
Windows Server 2016 Datacenter (48 cores)
Windows Server 2016 Standard (8 cores)
Windows Server 2016 Standard (16 cores)
Windows Server 2016 Standard (20 cores)
Windows Server 2016 Standard (24 cores)
Windows Server 2016 Standard (28 cores)
Windows Server 2016 Standard (40 cores)
Windows Server 2016 Standard (48 cores)
Windows Server 2019 Datacenter (8 cores)
Windows Server 2019 Datacenter (16 cores)
Windows Server 2019 Datacenter (20 cores)
Windows Server 2019 Datacenter (24 cores)
Windows Server 2019 Datacenter (28 cores)
Windows Server 2019 Datacenter (40 cores)
Windows Server 2019 Datacenter (48 cores)
Windows Server 2019 Standard (8 cores)
Windows Server 2019 Standard (16 cores)
Windows Server 2019 Standard (20 cores)
Windows Server 2019 Standard (24 cores)
Windows Server 2019 Standard (28 cores)
Windows Server 2019 Standard (40 cores)
Windows Server 2019 Standard (48 cores)
Control Panel Software
Your choice of operating system determines which control panels can be selected. Please note that not every operating system supports every control panel.
Plesk Web Admin Edition – 10 Domains (Linux)
Plesk Web Admin Edition – 10 Domains (Windows)
Plesk Web Pro Edition - 30 Domains (Linux)
Plesk Web Pro Edition - 30 Domains (Windows)
Plesk Web Host Edition - Unlimited Domains (Windows)
Plesk Web Host Edition - Unlimited Domains (Linux)
3 . Network
Uplink Port Speed
The uplink port is the maximum network connection speed from the server to the Internet. All servers have a 100/1000 Mbps network card connected for Internet traffic. Our 10 Gbps servers are, of course, supplied with 10 Gbps network cards. Weekly, monthly, and yearly bandwidth graphs are available in real time via the Customer Portal (CP), LeaseWeb’s customer portal. You can also view the projected bandwidth during a billing cycle to help you plan for future needs.
1 x 1000Mbps Full-Duplex
includes an economical mix of transit providers allowing for the lower cost to be passed on to the customer. The
includes more transit providers and better speed to those hard to reach providers on the Internet. Leaseweb can meet all your network requirements - depending on the type of application you are hosting at Leaseweb we are able to recommend different networks at varying price points and grades of service.
Fair Use Policy (FUP)
The service is provided to end-user Customers for normal, fair, and reasonable use. Bandwidth usage is to be reasonably consistent throughout every month, without irregular bandwidth usage patterns, either individually or as part of a group of Customer servers. For more details please consult: to
Special Terms and Conditions – 100 TB and 250 TB
Virtual Servers and Cloud:
Every Virtual Server and Cloud instance is provided with a single IPv4 address. Please note that it is not possible to order additional IPv4 addresses. For Private Cloud you can order up to 256 IP adresses.
Dedicated Servers/Bare Metal Servers:
You can order up to 16 IP addresses for Dedicated or Bare Metal Servers.
You can order up to 256 IP addresses for a half-rack or full rack. For shared Colocation the limit is 16 IP addresses.
Please note that the RIPE Network Coordination Centre has very stringent application criteria for IP assignment. LeaseWeb adheres to this policy and has implemented an internal procedure to comply. This may mean that you are not eligible for the maximum number of IP addresses as stated above. Our sales team will be happy to consult with you on the next steps for requesting additional addresses via email@example.com.
4 . Contract
Service Level Agreements
LeaseWeb houses its bare metal servers in secure, advanced data centers and can provide additional peace of mind for your business' critical operations with an extended Service Level Agreement (SLA).
You can find out more at our SLA page:
Basic – 24x7x24
Response time: 24hrs – Free phone 24/7 support – Hardware replacement in 24hrs
Bronze – 24x7x4
Response time: 4hrs – Free phone 24/7 support – Hardware replacement in 4hrs - 30mins per month of Advanced Support
Silver – 24x7x2
Response time: 2hrs – Free phone 24/7 support – Hardware replacement in 3hrs - 60mins per month of Advanced Support
Gold – 24x7x1
Response time: 1hrs – Free phone 24/7 support – Hardware replacement in 2hrs - 90mins per month of Advanced Support
Platinum - 24x7x½
Response time: 30mins – Free phone 24/7 support – Hardware replacement in 2hrs - 120mins per month of Advanced Support
Share your configuration
An error occured, please try again!
Copy and paste the link below to share your configuration:
Copied to clipboard!
Press Ctrl+C or Command+C to copy the link to your clipboard.
ADD TO CART
If you require more resources, please contact us for a custom quote
send us an e-mail
The International site provides access to our global portfolio of products.
For hosting exclusively in the United States, visit the US site.